Table of Contents
Advertisement
1. Equipment operation, including menus and toolbars.
2. Parameter index is the device operating parameters of a classified index.
3. Parameters value displays the current parameters of the index of specific parameters.
4. Message showing relevant operational status and results
5.1.1 Connect device
First, fill in the correct device IP address, and then click
select "Connect." If the connection is successful, IP address bar will turn into gray, such as
, At the same time, the status bar will show "Connect".
5.1.2 Disconnect
Click
Button or in the "Device" menu, select "Disconnect." If successful disconnect, IP
address bar will restore inputable, such as
displays "Not Connected."
5.1.3 Read device parameters
After a successful connection, point
be prompted to enter a user name and password
The default user name admin, password is nice
If the parameter was successfully read, read out all parameters will be prompted to complete.
For this operation, you need to pay attention "to read and write target" option. ROM is like
Button or in the "Device" menu,
, At the same time, the status
Button or in the "Device" menu, select "read." Will
NC-AD300E Manual
- 21 -
Advertisement
Table of Contents
