Table of Contents
Advertisement
NC-AD300E Manual
ip set 192.168.16.105: ffff0000 ok
The example set IP address "192.168.16.105", the subnet mask for the hexadecimal form
converted to decimal as "255.255.0.0". ok means modification has been finished
Note: This method modify the IP to take effect immediately, but don't save, even after reboot
take boot parameter.
Chapter 5. Software configuration
5.1 tools
Run the tools of PbxConfig.exe，the tools looked as below:
1.Operation
3.Parameter
2.Index
4.result message
Interface divided into four areas,
- 20 -
Advertisement
Table of Contents
