６ ６ ６ ６ .2 Routing Rule - NiceUC NC-AD300E User Manual

Index aera , select "SysPart->Rule->Length" will see the length table in the right, Use "Data" menu or
toolbar, or right-click menu, to add the length table.
The highest of number, matching conditions,"x"means NULL,none of the number can be
matched, "?" is wildcard, it means any number.
Length rule to serach the caller ID by devided it into sereral parts, maixma 8 parts. Fisrt to
match it with the smallest grade, if the "FindingResult" is "Finded, End", then the search stop,
otherwise, to subtract ThisLength for alreading found, and continue searching for next part. If you
can not find match for the next part, then number will be the "default length of the follow-up," or
serch failed if this value not be set.
See figure above configuration, for example, in RuleID 0, when called number is
17909075526520000 then search process is as follows: First, check rules in grade 0, SID = ? (SID
=surfix of caller ID), ? = all numbers), "The length" is 0, and FindResult is Continued to Find,
Next Length = 8, then keep searching in grade 1, in grade 1 there is a rule SID = 17909, match
with this caller ID, "ThisLength" = 5, and FindingResult is "Continue to Find, Length unknown",
so thisLength will be cut, the number will change to 075526520000, and we keep searchingi n
Grade 2, SID = 0755 to match with the number.
5.2.6.2 Routing Rule
In Index area, select "SysPart->Rules->router" to see the router table, Use "Data" menu or
toolbar, or right-click menu, to add and delete the table.
The following for a detailed description of each parameter:
RuleID, specify which group belongs to the routing rules.
NC-AD300E Manual
- 34 -