Operation Configuration; Dsp Function; Telnet Service; Login User - NiceUC NC-AD300E User Manual

5.2 Operation configuration

5.2.1 DSP function

DSP function is the essential function of the device must be properly set up, In the left side of
configuration tool click"system parameters" index, and modify the parameters in the right side.
AD300E have two DSP, usually according above of the configuration
Note: you need to config "MFC/DTMF" or "DTMF(06)"to detail user button
After completion of editing, write to ROM and restart the device to take effect.

5.2.2 Telnet service

In the left side of configuration tool, pleas click"system parameters" index, and modify the
parameters in the right side
Here can modify telnet listenport
After completion of editing, write to ROM and restart the device to take effect.

5.2.3 Login User

Specify the telnet connection and configuration tool for certified users, up to 10 users set up.
Choose "Loginuser" in parameter index area,and you can find there is loginuser list in the right
side. Using "data" menu,toolbar or right menu to do add and delete operation.
NC-AD300E Manual
- 23 -