Table of Contents
Advertisement
NC-AD300E Manual
Interface type, designated as the AN side or LE side.
Access network AN is an abbreviation from the Service Node Interface (SNI) and the associated
user-network interface (UNI) between the number of transmission entities (such as the line facilities
and transmission facilities), is for the supply of telecommunications services to provide the necessary
carrying capacity the implementation of the system. An AN can be reused, exchange connectivity and
transport functional components.
LE is a local switch acronym, it's a subscriber line through the AN terminating switches.
After completion of editing, write to ROM, restart the device for effective.
L3 address, is EFaddr types of PSTN signaling or control protocol message in the third layer of the
address. The aim is for the user port or public control functions provide a unique reference. Goes
to "L3 address" see below L3 address table.
One Phone number is corresponding to one address. In the "Phone Number" column on the
right-click pop-up menu can be "incremental", "decreasing" or "Batch Edit" number of the table.
After completion of editing, writing to ROM and RAM, can be effective immediately.
5.2.5 Analog Line Configuration
Analog circuits must be configured correctly, so user can make calls.
5.2.5.1 Line Type settings
Analog circuit is divided into inner (FXS) and outside (FXO) two kinds. Select "analog line"
below the "line parameter" appears on the right analog line parameter table, in the Line Type
column, click in the pop-up list, select the correct type.
- 30 -
Advertisement
Table of Contents
