Table of Contents
Advertisement
Every number correspondence a group number,and you can not only increase single,but also
batch. Click right menu operation,to support load numbers from the files.
After add CDB numbers, you can reference them in the routing and convert rule tables.
As frist , you must add a virtual rule that SID format is "cdb,xx" ,xx means character length,
If you want to match that figure above 8-bit word length of crown number,and then add the actual
number.
When device are searching crown number, if there have vitural rules, then it will
After completion of editing, write to ROM and RAM for effective.
Chapter 6 Calling detail records
AD300E send out the CDR through net port. For receiving CDR, other software need to run.
For set up the destination of the CDR goes to "SysPart"
The original format of CDR is text strings, each one with "R" at the beginning and "\ r \ n" at the
end. With a space between each text string separated by fixed length, if the text string is not long
enough, will add the space to this fixed length, in the text string, there are four kinds of line types, 0 is
E1,1 is analog line, 2 is
There are three formate of CDR, 1, 2 and 101 which are shown below:
Format 1
lines, 3 is wireless lines. Call duration is seconds.
NC-AD300E Manual
- 47 -
Advertisement
Table of Contents
