Installing The Blade-Server Bezel Assembly - IBM eServer BladeCenter JS20 Type 8842 Installation And User Manual

Installing the blade-server bezel assembly

The following illustration shows how to install the bezel assembly on the blade
server.
Complete the following steps to install the blade-server bezel assembly:
1. Read the safety information beginning on page vii and "Installation guidelines"
2. Connect the control-panel cable to the control-panel connector on the
3. Carefully slide the bezel assembly onto the blade server as shown in the
Bezel-assembly
release
Control panel
connector
on page 31.
system-board assembly.
illustration, until it clicks into place.
Chapter 7. Installing and removing options and customer-replaceable units
Bezel-assembly
release
Control-panel
cable
49