Opening The Blade Server Cover - IBM eServer BladeCenter JS20 Type 8842 Installation And User Manual

Opening the blade server cover

The following illustration shows how to open the cover on the blade server.
Cover
pins
Complete the following steps to open the blade server cover:
1. Read the safety information beginning on page vii and "Installation guidelines"
2. Carefully place the blade server on a flat, static-protective surface, with the
3. Press the blue blade-cover release on each side of the blade server and lift the
4. Lift the cover from the blade server and set it aside.
Statement 21:
CAUTION:
Hazardous energy is present when the blade server is connected to the power
source. Always replace the blade cover before installing the blade server.
34
BladeCenter JS20 Type 8842: Installation and User's Guide
Blade-cover
release (blue)
on page 31.
cover side up.
cover open, as shown in the illustration.
Blade-cover
release (blue)