IBM eServer BladeCenter JS20 Type 8842 Installation And User Manual page 18

Record information about the blade server in the following table.
The machine type, model number, and serial number are on the identification label
that is behind the control-panel door on the front of the blade server, and on a label
on the side of the blade server that is visible when the blade server is not in the
BladeCenter unit. You will need these numbers when you register the blade server
with IBM.
Identification
label
Control-panel
door
Release
levers
Notes:
v The maximum number of blade servers that the BladeCenter unit supports varies
v Two power modules are required to support the blade servers in blade bays 1
v Two additional power modules are required to support the blade servers in blade
2
BladeCenter JS20 Type 8842: Installation and User's Guide
Product name
Machine type
Model number
Serial number
by the wattage of the power modules that are installed in the BladeCenter unit.
For more information about determining the power requirements for the blade
server, see the IBM Eserver BladeCenter Power Module Upgrade Guidelines
Technical Update on the World Wide Web at http://www.ibm.com/pc/support/.
through 6 in the BladeCenter unit. If you install blade servers in these blade
bays, you must install power modules in power-module bays 1 and 2 in the
BladeCenter unit.
bays 7 through 14 in the BladeCenter unit. If you install blade servers in these
blade bays, you must install power modules in power-module bays 3 and 4 in the
BladeCenter unit.
BladeCenter JS20
8842
_____________________________________________
_____________________________________________