IBM eServer BladeCenter JS20 Type 8842 Installation And User Manual page 76

Checkpoint code Description
D008 Initialize the console and flush the
queues.
D00D Evaluate the NVRAM script.
D010 First pass of the open firmware
initialization is complete; establish
parameters for restart.
D011 First pass of the open firmware
initialization is complete; control
returned to the initialization firmware.
D012 Second pass of the open firmware
initialization is complete; control
returned to the initialization firmware.
D099 Start the system information
validation utility.
D100 The system serial number was found
to be blank.
D101 A machine serial number has been
entered.
D102 The machine type field has been
found to be blank.
D103 The machine type has been entered.
60
BladeCenter JS20 Type 8842: Installation and User's Guide
Suggested action
1. Perform the system checkout procedure. See
"System checkout" on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 58.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Enter a valid serial number. The backspace and
delete keys can be used to edit the value entered.
Note: See step 10 on page 46 for more information
about entering the serial number.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for more information.
Re-enter the serial number used for D100. The
backspace and delete keys can be used to edit the
value entered.
1. Enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
Re-enter a valid machine type. The backspace and
delete keys can be used to edit the value entered.