The Ibm Bladecenter Documentation Cd; Hardware And Software Requirements - IBM eServer BladeCenter JS20 Type 8842 Installation And User Manual

v BladeCenter Management Module Command-Line Interface Reference Guide:
v BladeCenter Management Module Installation Guide: This document contains
v IBM Eserver BladeCenter and BladeCenter T Serial Over LAN Setup Guide:
v IBM 4-Port Gb Ethernet Switch Module for BladeCenter Installation and User's
v Nortel Networks Layer 2-7 GbE Switch Module for IBM BladeCenter Installation
Additional documentation might be included on the IBM BladeCenter Documentation
CD.

The IBM BladeCenter Documentation CD

The IBM BladeCenter Documentation CD contains documentation for the blade
server in Portable Document Format (PDF) and includes the IBM Documentation
Browser to help you find information quickly.

Hardware and software requirements

The IBM BladeCenter Documentation CD requires the following minimum hardware
and software:
v Microsoft
v 100 MHz microprocessor
v 32 MB of RAM
v Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
4
BladeCenter JS20 Type 8842: Installation and User's Guide
module. This document also provides general information about the management
module and contains a description of the management module features.
This document contains instructions for installing, starting, configuring, and using
the IBM Eserver BladeCenter management-module command-line interface.
This document also provides general information about the BladeCenter
management-module command-line interface and contains a description of its
features.
instructions for installing, setting up, starting, and configuring the management
module.
This document contains instructions for establishing a Serial Over LAN (SOL)
connection, enabling the SOL feature, and configuring the blade server so that
you can run SOL sessions and use the BladeCenter management-module
command-line interface. This document also contains instructions for updating
and configuring BladeCenter components for SOL operation using the
management-module Web-based management and configuration program.
Guide: This document contains instructions for setting up, installing, and
configuring the IBM 4-Port Gb Ethernet Switch Module for BladeCenter and a
description of the switch-module features.
Guide: This document contains instructions for setting up, installing, and
configuring the Nortel Networks Layer 2-7 GbE Switch Module for IBM Eserver
BladeCenter and a description of the switch-module features.
®
Windows NT
Windows 2000, Windows XP, AIX
systems
Note: Acrobat Reader software is included on the CD, and you can install it
when you run the Documentation Browser.
®
4.0 (with Service Pack 3 or later), Windows
® ®
, UNIX , SUSE LINUX, or Red Hat Linux
®
98,
®