Fan Speed; Serial Number; Sw Version; Factory Reset - AJA Ki Pro Installation And Operation Manual

58

70.3 FAN SPEED

70.3 FAN SPEED
This parameter determines the speed of Ki Pro's internal cooling fan. In some
environments where audio recording is occurring close to the Ki Pro unit, it may be
desirable to set the fan speed to "QUIET RECORD" for optimum quiet operation.
NORMAL (DEFAULT)
NORMAL AUTO
QUIET RECORD
QUIET AUTO

80.1SERIAL NUMBER

This parameter displays this Ki Pro's unique serial number.

80.2 SW VERSION

This parameter displays Ki Pro's software version level.

99.0 FACTORY RESET

Selecting this parameter and then pressing the ADJUST (up) button for 2 seconds
recalls
Ki Pro's factory default settings.
Caution!
Selecting this parameter and recalling factory defaults will overwrite the current
settings (with the exception of network settings, which are retained).
Recalling factory defaults does not affect these network settings: IP
Config, IP Address, Subnet Mask, Default Gateway, System Name, 802.11 settings, or
Date and Time. To clear network settings and recall factory defaults, hold down both
the Adjust (up) and Adjust (down) buttons at the same time.
Note: To set a single parameter to its factory default value, go to that parameter and hold
down both the Adjust (up) and Adjust (down) buttons at the same time.
Fan runs at normal fixed speed for optimum cooling.
Fan runs at variable speeds for optimal cooling.
Fan runs at a fixed slower speed for optimum quiet.
Fan runs at normal speed until recording begins, then the
fan ramps down to a slower speed for optimum quiet.