Update Firmware Screen; Preparing To Update Software - AJA Ki Pro Installation And Operation Manual

Update Firmware
Screen
Ki Pro Installation and Operation Manual — Web Browser via Ethernet
The Update Firmware screen allows you to update your Ki Pro to later versions of software as
they are issued by AJA and posted on the website. When software updates are released, they
often contain new features, improvements, and bulletins that may be very useful. We suggest
checking the website when you have time.
Ki Pro Web Interface, Update Firmware Screen

Preparing to Update Software

Although Ki Pro comes from the factory pre-installed with software, it may not be as up-to-date
as software posted on our AJA website. This topic describes the steps required to upgrade the
software in your Ki Pro.
1. Download the Latest Ki Pro Software
Current and past releases of Ki Pro software are available on the World Wide Web from
AJA's website. To get the software, point your browser to:
http://www.aja.com/support/ki-pro/ki-pro.php
This link is also available at the bottom of the "Update Firmware" screen (discussed later
on this page). Once you're at the update page, Ki Pro software files can be selected to
download to your Mac or PC for upgrading your machine.
2. Unpack the Software
Ki Pro software update files are "ZIP" files, which you can open with a number of standard
and third party uncompressor applications. The software image that you'll install on Ki
Pro is a file with a name like kipro_ver_2.0.0.99.bin or similar.
Note: Depending on your PC or Mac operating system settings, the ".bin" extension may not be
visible to you in a file directory.
73
1