Video Input; Audio Input; Audio Channels; Component In Lvl - AJA Ki Pro Installation And Operation Manual

2.1 VIDEO INPUT

2.2 AUDIO INPUT

2.3 AUDIO CHANNELS

3.1 COMPONENT IN LVL

Ki Pro Installation and Operation Manual — CONFIG menus
2.1 VIDEO INPUT
This parameter selects a video input source from the video input connections available.
This is the video that will be recorded and/or passed through.
SDI (default)
HDMI
COMPONENT
2.2 AUDIO INPUT
This parameter selects an audio input source from the audio input connections
available, including embedded SDI audio which requires an SDI video source and HDMI
audio, which requires and HDMI video source.
SDI (default)
RCA
XLR
HDMI
Note: XLR input could be microphone level or line level, depending on the connector panel
switch setting.
2.3 AUDIO CHANNELS
This parameter selects the use of either two or eight audio channels via SDI embedded
audio. Generally, when working with camera sources, there are only one or two audio
tracks being produced, and therefore 2 channel would be the appropriate selection. In
post production use, there are often more channels of audio required, so 8 channel
audio may be the appropriate choice in such situations. Ki Pro only allows for the
selection of either 2 channels or 8 channels of audio to be written to the QuickTime file
that is recorded. Therefore, if the source has more than 2 channels of audio, but less
than 8 channels of audio that need to be preserved, the CONFIG Menu parameter 2.3
Audio Channels would need to be set to "8 Channels."
Note: Not all devices support 8 channel audio. Ki Pro does not provide a "mixdown" option for
8 channel recordings on output, so be sure to use devices that support 8 channel audio via
SDI if the 8 channels recorded are desired.
2 Channels (default)
8 Channels
3.1 COMPONENT IN LVL
This parameter selects the input level for signals applied at the component video input
connectors.
SMPTE/N10 (default)
BETACAM
Selects SDI input connector
Selects the HDMI input connector
Selects the Component input connectors
Selects SDI embedded audio from the SDI input
connector (if SDI video input is selected)
Selects the two RCA jacks (stereo pair) for audio input
Selects the XLR input for audio input
Selects HDMI embedded audio (if HDMI video input is
selected)
Selects recording of 2 SDI embedded audio channels
Selects recording of 8 SDI embedded audio channels
Selects SMPTE/N10 input signal levels
Selects BETACAM input signal levels
45
1