Transport Screen - AJA Ki Pro Installation And Operation Manual

Transport Screen

Ki Pro Installation and Operation Manual — Web Browser via Ethernet
Clip Append (17.4): This parameter is used with parameter 17.5 ALPHA APPEND to append a text
value after the CLIP NUMBER or have no text appended.
Take (17.8): This parameter determines the TAKE number, from 1 to 999, that follows the CLIP
NAME and CLIP NUMBER, followed by any ALPHA APPEND (if selected), generated for all
clips while using this setting.
Alpha Append (17.5): This parameter is used with parameter 17.4 CLIP APPEND to append a text
value after the CLIP NUMBER.
Use Custom Clip Name (19.1): This parameter enables or disables whether a custom clip name can
be used. Refer to "Custom Clip Naming" in Chapter 3 for greater detail.
Custom Clip Name (19.2): This parameter allows you to enter a custom clip name. Once entered,
you'll have to click the Apply button for it to take effect and be used.
Use Custom Clip Take (19.3): This parameter enables or disables whether a custom clip take name
can be used. Refer to "Custom Clip Naming" in Chapter 3 for greater detail.
Custom Take (19.4): This parameter allows you to define a custom take number. Once entered,
you'll have to click the Apply button for it to take effect.
Use Gang Clip Name (22.1): This parameter is used when performing gang recording via
multiple Ki Pros (refer to Controlling Multiple Ki Pros earlier in this Chapter). If the desire is to
have clips named the same across all Ki Pro ganged units' recordings, then use the "Master
Name" pull down selection. If the desire is to have clips named independently on Ki Pro
units, then "Slave Name" should be selected from the pull down. Selecting "Slave Name"
means that the recording will take it's name from the individual Ki Pro's parameters and not
accept the value pushed to the Slave by the Master Ki Pro. Refer to "Custom Clip Naming" in
Chapter 3 for greater detail.
This screen offers record, playback, fast forward, rewind and stop controls, similar to those
available on the operator-side of Ki Pro. The screen also duplicates what is displayed on the Ki
Pro front visual display, so you can see exactly what the Ki Pro operator/camera person is seeing.
Ki Pro Web Interface, Transport Screen
STOP : Press STOP to end playback or a media operation (PLAY, FF, REV, or RECORD). When
stopped, Ki Pro displays the current point in the stopped clip. STOP can also be considered
a "pause" button. A double-press of the STOP button will return Ki Pro to an
E-to-E state.
PLAY : press PLAY to begin forward playback of the current clip at normal speed.
67
1