Programming Features; User Programmable Features - Excalibur AL-1650-EDPB Operation Manual

Programming Features

Step 1 Turn the ignition key "On", then "OFF"
Step 2 Within 5 seconds of step 1, press the valet switch 5 times to access user
features (10 times to access installer features)�
~ The siren/horn will sound and the status light will turn on�
Step 3 Within 10 seconds of step 2, press the valet switch the number of times cor-
responding with the desired feature's number�
~ The siren/horn will chirp, the status lights, and the parking lights will flash equal
to the selected feature�
Step 4 Change the feature by pressing the transmitter button that corresponds with
the desired setting� The siren/horn will chirp to correspond with the chosen setting�

User Programmable Features

Feature #1 - SecureCode
DEFAULT - 1 Press
SecureCode is a unique patented feature which allows you to custom select the
number of Valet Switch presses in two stages, instead of a single "1 press", which
would be required in order to perform an Emergency Override. If any of the three anti-
carjacking features are utilized, a customized SecureCode would also be required to
turn it off once it is fully activated� The SecureCode operation is described on page 9�
To custom program a new SecureCode:
Step 1 Follow Steps 1 to 4 in the previous "Programming Features" section to access
"feature #1"�
Step 2 Within 10 seconds slowly press and release the transmitter's "arm/lock"
button the number of times equal to the desired SecureCode for stage 1, allow the
system to respond to each transmitter button press with a siren chirp before pressing
the button again. A few seconds after the final button press, the system will chirp the
horn/siren confirming the total number for stage 1.
Step 3 Configure stage 2 of the SecureCode by pressing and releasing the "disarm/
unlock" button the number of times desired for the stage 2� The system will
confirm as it did for stage 1.
Feature #2 - Last Door Arming
Off
On w/o doors locking
On w/ doors locking
"Last Door Arming" has the system automatically arm itself every time you exit the
vehicle (the complete operation is described on page 7)�
Feature #3 - Automatic Rearming
Off
On w/o doors locking
On w/ doors locking
Enhanced auto rearm (press "start" button to program)
"Automatic Rearming", described on page 7, rearms the alarm if accidentally dis-
armed� Options are to have Automatic Rearming operate with or without also locking
the doors when the system does rearm� Enhanced auto rearm allows you to cancel
the rearming sequence by pressing unlock a 2nd time after disarming.
12
(press "lock" button to program) - DEFAULT
(press "unlock" button to program)
(press "trunk" button to program)
(press "lock" button to program) - DEFAULT
(press "unlock" button to program)
(press "trunk" button to program)