Related Manuals for Excalibur AL-2060-EDPB
Summary of Contents for Excalibur AL-2060-EDPB
- Page 1 AL-2060-EDPB OLED Color 2-way Alarm & Remote Start April 23, 2015 Operation Guide Temporary cover. Color cover is in a separate fi le.
-
Page 2: Table Of Contents
Table Of Contents Introduction ������������������������������������������������������������������������������������������������������������������� 3 Controller & Transmitter Overview�������������������������������������������������������������������������������� 4 The 2-Way Controller ����������������������������������������������������������������������������������������������� 4 The Controller Status Screen ����������������������������������������������������������������������������������� 4 The 1-Way Transmitter ��������������������������������������������������������������������������������������������� 5 Controller & Transmitter Functions ������������������������������������������������������������������������������� 5 Other Remote Start Features ��������������������������������������������������������������������������������������� 9 Low Battery/Low Temp Automatic Starting ��������������������������������������������������������������� 9 Turbo Timer Feature �������������������������������������������������������������������������������������������������... -
Page 3: Introduction
Introduction Congratulations for choosing one of the most versatile, fully-featured vehicle secu- rity and convenience systems available today� Omega Research & Development has been a leader in vehicle security products for nearly 4 decades� Please take the time to read this manual thoroughly so you can fully enjoy the benefits and features this system offers�... -
Page 4: Controller & Transmitter Overview
Controller & Transmitter Overview THE 2-WAY CONTROLLER Controller part number: 156-03 1) Antenna: Sends commands to the system and receives confi rmations for 2-way functions. 2) OLED Display: Displays all controller functions as well as the status of your system� 3) Backlit Buttons: Flashes while transmitting and indicates battery charging status�... -
Page 5: The 1-Way Transmitter
Controller & Transmitter Overview (cont’d) NOTE: The 2-way Controller is shipped from the factory in POWER OFF mode. If you connect the charger before powering it, perform POWER OFF, then POWER ON again. POWER ON: Press and hold the “P” button for at least 1 second POWER OFF: Press the “P”... - Page 6 Controller & Transmitter Functions (cont’d) TRUNK RELEASE / CHANNEL 2: Press the “TRUNK” button for 3 seconds� • THE SYSTEM WILL DISARM AND THE TRUNK WILL OPEN (IF EQUIPPED)� • UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER WILL PLAY THE TRUNK RELEASE ANIMATION AND BEEP TWICE (1-WAY TRANSMITTER: PRESS AND HOLD THE TRUNK BUTTON FOR 3 SECONDS)
- Page 7 Controller & Transmitter Functions (cont’d) CHANNEL 3: Press and hold the “TRUNK” & “ “ buttons for 3 seconds� • YOUR SYSTEM WILL ACTIVATE THE CHANNEL 3 OUTPUT� • UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER WILL PLAY THE CHANNEL 3 ANIMATION�...
- Page 8 Controller & Transmitter Functions (cont’d) PANIC: Press and hold the “LOCK” or “UNLOCK” button for 3 seconds� • THE SIREN/HORN WILL SOUND, THE PARKING LIGHTS WILL FLASH, AND THE DOORS WILL LOCK OR UNLOCK DEPENDING WHICH BUTTON IS PRESSED� (1-WAY TRANSMITTER: PRESS AND HOLD THE LOCK OR UNLOCK BUTTON FOR 3 SECONDS) SILENT ARM / DISARM: Press and release the “TRUNK”...
-
Page 9: Other Remote Start Features
Controller & Transmitter Functions (cont’d) AUXILIARY FUNCTIONS 1-4: The actual operation of these functions will vary from car to car� They are designed to operate extra vehicle functions like automatic sliding doors or motorized hatches. Aux 1-4 are virtual outputs only available on certain vehicles when this system is integrated with the vehicle’s data network. -
Page 10: Pit-Stop Feature
Other Remote Start Features (cont’d) PIT-STOP FEATURE This feature allows you to leave your engine running for making quick errands� To use this feature, have the engine running normally from the ignition switch and your foot off the brake pedal. Press the Valet Switch twice; the parking lights will flash to confirm. -
Page 11: When The System Triggers
Security System Features (cont’d) WHEN THE SYSTEM TRIGGERS If the system were to be compromised while armed, it will trigger sounding the siren/horn and flashing the parking lights for 30 seconds (programmable). At this point you will also be notified on the controller as to which zone is violated (if in range of the system)�... -
Page 12: Using The Valet Switch
Using The Valet Switch EMERGENCY OVERRIDE If you were to lose or break your controller, you’d need to perform an emergency override to disarm the system and use your vehicle� To do so, use the following steps: STEP 1 - Enter the vehicle (the alarm should sound)� STEP 2 - Turn the ignition key to the “ON”... -
Page 13: The Status Light
The Status Light The status lights, located in the window-mount antenna, provide a visual indication of the system’s status� SECURITY SYSTEM STATUS OFF: The alarm is disarmed and not performing any automatic functions� ON: The alarm is in valet mode� FLASHING SLOW: The alarm is armed and monitoring all entry points�... -
Page 14: Multi-Car Operation & Vehicle Profiles
Multi-Car Operation & Vehicle Profi les MULTI-CAR OPERATION The controller can operate up to 2 different systems� When controlling 2 systems, it will receive all status updates on the currently selected vehicle profi le and will receive only trigger alerts for the 2nd vehicle� You can switch from one car to the other at any- time as well as choose a unique image and name for each vehicle�... -
Page 15: Programming Controller Options
Programming Controller Options Each function button on the controller also serves for navigating through the option menus and making changes to the controller options� These secondary functions are indicated by small icons in the upper corners of each button. See below for an expla- nation of each button’s function�... -
Page 16: Setting The Clock
Programming Controller Options (cont’d) SETTING THE CLOCK 1) Press the “P” button to access the options menu� 2) Scroll down until “Set Clock” is highlighted 3) Press the button to select� 4) Scroll to highlight either 12 (AM/PM) or 24 hour format� 5) Press the ... -
Page 17: Selecting Button Beep
Programming Controller Options (cont’d) SELECTING BUTTON BEEP With this option turned ON, the controller will beep to con- fi rm each button press. The default setting is OFF. To turn ON/OFF, use the following procedure: 1) Press the “P” button for 3 seconds to access options� 2) Scroll down until “Button Beep”... -
Page 18: Anti-Carjacking Protection
Anti-Carjacking Protection The system is equipped with two separate Anti-Carjacking protection features (igni- tion, open door, or both)� All are programmable, and must be turned on to operate� Once activated, the user has 60 seconds to cancel the Anti-Carjacking protection process (described below)�... -
Page 19: Programming Controllers/Transmitters
Programming Controllers/Transmitters Standard Programming: Use this method to program additional or replacement transmitters� Before you begin, have all transmitters at hand and make sure the cor- rect vehicle profile (see page 12) is selected on the controller(s). Step 1 Then, turn the ignition “on”� Step 2 Within 5 seconds of Step 1, press the Valet Switch 5 times�... -
Page 20: User Programmable Features
User Programmable Features Feature #1 - Remote Start Run Time 10 Minutes (press “lock” button to program) - DEFAULT 5 Minutes (press “unlock” button to program) 15 Minutes (press “trunk” button to program) 20 Minutes (press “start” to program) This sets the maximum amount of time that the remote start will keep the engine running if it is not shut down by other methods�... - Page 21 User Programmable Features (cont’d) Feature #7 - Unlock w/ Trunk Release (press “lock” button to program) - DEFAULT (press “unlock” button to program) “2nd channel” is most commonly used for trunk release, in which case the alarm should also disarm. This feature, when on, configures the system to unlock/disarm when the 2nd channel is activated�...
- Page 22 User Programmable Features (cont’d) Feature #13 - NOT USED Feature #14 - Ignition Activated Override (press “lock” button to program) (press “unlock” button to program) - DEFAULT This feature allows an activated system to be overridden and disarmed by simply turning the ignition switch on within 10 seconds of the system’s activation�...
-
Page 23: Installer Programmable Features
Installer Programmable Features This group of Installer Programmable Features are all accessed as a group in the second level of features’ programming� These features have a direct affect upon the system’s operations related to the installation and vehicle type AND SHOULD ONLY BE CHANGED BY THE INSTALLER!!! Feature #1 - Remote Start Activation From The WHITE/BLUE Wire 1 pulse (press “lock”... - Page 24 Installer Programmable Features (cont’d) Feature #5 - Light Relay Function Dome Light Output (press “lock” button to program) - DEFAULT Start (press “unlock” button to program) Ignition Output (press “trunk” button to program) Accessory Output (press “start” button to program) Status (press “lock”...
- Page 25 Installer Programmable Features (cont’d) Feature #10 - Turbo Timer (press “lock” button to program) - DEFAULT Run 1 Minute (press “unlock” button to program) Run 2 Minutes (press “trunk” button to program) Run 3 Minutes (press “start” button to program) This feature, the operation of which is described on page 8, when turned on configures the system to automatically keep the engine running briefly after the key is turned off.
- Page 26 Installer Programmable Features (cont’d) Feature #16 - Starter Interrupt Functions Alarm Only (press “lock” button to program) Anti-Grind Only (press “unlock” button to program) Alarm & Anti-Grind (press “trunk” button to program) - DEFAULT Automatic (press “start” button to program) Alarm Only - The Starter Interrupt is operable whenever the alarm is armed�...
- Page 27 User Feature Programming: Ignition on, off, press valet 5 times Lock Button Unlock button Trunk button Start button Lock + Unlock # Feature (Brake x 1) (Brake x 2) (Brake x 3) (Brake x 4) (Brake x 5) 1 Remote Start Run Time 10 min 5 min 15 min...
- Page 28 Back Cover Color cover is in a separate file.