Programming Features; Programmable Features - Excalibur RF-31-EDP Operation Manual

Step 1 Turn the ignition key "ON", then "OFF"
Step 2 Within 5 seconds of step 1, press the valet switch 5 times to access user features (10 times
to access installer features).
~ The antenna will beep and the status light will turn on.
Step 3 Within 10 seconds of step 2, press the valet switch the number of times corresponding with
the desired feature's number.
~ The antenna will beep, equal to the selected feature.
Step 4 Change the feature by pressing the transmitter button that corresponds with the desired set-
ting. The antenna will beep to correspond with the chosen setting.
Feature #1 - Ignition Controlled Lock/Unlock
Lock And Unlock w/ Ignition
Lock w/ Ignition On
Unlock w/ Ignition Off
Off
This feature controls the lock/unlock operations when the ignition key is turned on/off,
Feature #2 - Last Door Locking
On (press "lock" button to program)
Off (press "unlock" button to program) - DeFAULT
"Last Door Locking" has the system automatically lock itself every time you exit the vehicle (the com-
plete operation is described on page 9).
(press "lock" button to program)
(press "unlock" button to program)
(press "trunk" button to program)
(press "start" button to program) - DeFAULT

programming Features

programmable Features

13