Reverse Door Swing - Whirlpool WED7500GC0 Installation Instructions Manual

REVERSE DOOR SWING

1.
Place towel on dryer
Place towel on top of dryer to avoid damaging the surface.
2.
Remove bottom screws
Open dryer door. Remove bottom screws from dryer cabinet
side of hinges. Loosen (do not remove) top screws from dryer
cabinet side of hinges.
3.
Lift door off top screws
Lift door until top screws in dryer cabinet are in large part of
hinge slot. Pull door forward off screws. Set door (handle side
up) on top of dryer. Remove top screws from dryer cabinet.
4.
Remove screws from hinges
Remove screws attaching hinges to door.
5.
Flip door over
Flip door over so handle side is down.
® TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
†
21