Table of Contents
Advertisement
2.3
Breaking Bluetooth
Holding down the trigger switch for 5 seconds or scanning the "Break Bluetooth
forcibly breaks the scanner's Bluetooth
procedure in Section 12.1.)
Note: Breaking the Bluetooth
operation" QR Code symbol.
2.4 Reestablishing Bluetooth
When the scanner's Bluetooth
switch reestablishes the Bluetooth
master; the scanner as a master connects to a target slave.
- Scanning the "Break Bluetooth
- Holding down the trigger switch to break the Bluetooth
- Modifying the scanner configuration with the configuration software (ScannerSetting_2D)
- "Reconnect request" dialog displayed by the configuration software (ScannerSetting_2D)
- Replacing the battery cartridge
Wireless Links
wireless link. (The QR Code symbol is given in Section 12.2 and its
wireless link does not disable the Bluetooth
Wireless Links
wireless link has been broken by any of the following events, pressing the trigger
wireless link. The scanner as a slave waits for a connection request from the
wireless link" QR Code symbol (See Sections 12.1 and 12.2.)
interface. To disable it, scan the "End
wireless link
6
wireless link" QR Code symbol
Advertisement
Table of Contents
