Denso AT27Q-SB User Manual page 107

®
 Bluetooth
interface and link
Enabling/disabling Bluetooth
Start operation (default)
®
Break Bluetooth wireless link
Scanning with Bluetooth
Scanning the "Scan w/ Bluetooth
®
Bluetooth wireless link being broken. With this setting selected, data transfer with the host computer is impossible.
"Scan w/ Bluetooth
Configuring the scanner as slave
Scanning the following QR Code symbol configures the scanner as a slave.
Configure as slave (default)
Start pairing
Scanning the following QR Code symbol starts Pairing.
Start pairing(default)
®
interface and breaking the Bluetooth
®
wireless link broken
®
link broken" QR Code symbol allows the scanner to scan codes with the
®
link broken"
®
wireless link
Cancel "Scan w/ Bluetooth
94
End operation
®
link
broken" (default)