Table of Contents
Advertisement
(12) Beeper, indicator LED, marker beam and illumination LEDs
Items
Beeper control
Beeping tone
Beeper beep time
Beeper volume
Scan complete sound
Indicator LED control
Marker
Beeper sound when power turned ON
Illumination LED
Power save mode
(Note1) When "Power save mode" is enabled, a reading distance may be shorter under 500 lx ambient illumination.
Parameters
Enable
Disable
Low beeping tone (2.5 kHz)
Medium beeping tone (2.7 kHz)
High beeping tone (2.9 kHz)
Short (60 ms)
Medium (80 ms)
Long (120 ms)
High
Medium
Low
Single beep
Multiple beep
Enable
Disable
Marker-OFF mode
Normal marker mode
Marker-ON mode
Enable
Disable
Turns off
Turns on
Enable (Note 1)
Disable
: Can be changed only with the configuration software.
88
Defaults
Refer to:
Section 7.1
Section 7.1
Section 7.2
Section 7.3
Section 7.1
Section 7.4
Section 7.4
Advertisement
Table of Contents
