Chapter 2 Bluetooth
For terms relating to Bluetooth
2.1 Enabling Bluetooth
Using the scanner for the first time requires scanning the "Start setting" and "Start operation" QR Code symbols given
in Section 12.2 with the procedure in Section 12.1. Using the scanner when the "End operation" is selected requires
scanning the "Start operation" QR Code symbol. Scanning those code symbols enables the Bluetooth
Note: Always disable this scanner's Bluetooth
Bluetooth
radio waves (2400 to 2483.5 MHz, maximum 2.5 mW) present a potential safety risk.
This scanner interprets the "End operation" QR Code symbol as a command to disable the Bluetooth
Note: When the scanner leaves the factory or it has scanned the "End operation" QR Code(in Section 13.2), it no
longer reads codes except the "Start operation" QR code, the " batch-process" QR code, and the barcode on the
reverse side of the Communications adapter (BA11/10-RKU).
Interface
wireless communication in this manual, refer to Appendix 3 "Bluetooth
Interface
interface in hospitals, aircraft, and other environments where the
2
Glossary."
interface.
interface.