Replacing The Battery Cartridge - Denso AT27Q-SB User Manual

2d code handy scanner
Table of Contents

Advertisement

9.2 Replacing the Battery Cartridge

The rechargeable battery cartridge is a consumable part with a finite service life. It is time to replace it when a full
charge lasts a significantly shorter time than previously. Note that the service life varies with usage conditions
Follow the replacement procedure given below also when it is necessary to take the battery cartridge out of the
scanner due to any scanner trouble.
(1) Remove the screw that secures the battery cover.
(2) Open the battery cover gently that is connected with the cable.
(3) The battery cartridge out of the scanner.
(4) Disconnect the battery cable connector.
Note: When disconnecting the cable connector, be sure to hold the connector housings as shown below. Do not
pull the cables; doing so will result in broken wires.
Battery cover
Scanner
Battery cartridge
Battery cable
connector
66

Advertisement

Table of Contents
loading

This manual is also suitable for:

At27q

Table of Contents