Denso AT27Q-SB User Manual page 18

When connecting the scanner with an iPhone or iPad.
Follow the procedures below when connecting the scanner with an iPhone or iPad.
When using the operator's guide (included with the scanner).
(1) Turn the connected device ON to switch on the Bluetooth® function.
(2) Set the scanner communication settings.
Allows the scanner to scan "iOS(iPhone,iPad)"QR Code at Easy connection setup, QR-coded Parameter Menu.
Wait for the scanner to beep three times to complete the settings.
(3) Press the trigger switch of the scanner and wait for the connected device to be connected.
(4) Select the scanner from the connected device list and connect it to the device. The scanner beeps twice if
successfully connected.
(5) The next time connecting to the device, simply press the trigger switch.
When using the setting software (ScannerSetting_2D)
(1) Select the SPP profile for the scanner and connect it to the communication adapter (BA11-RKU) or the host
computer equipped with the Bluetooth®.
(2) Change the scanner settings to "HID" for the interface, "SSP" for the security function, "Slave" for the mode,
"Peripheral keyboard" for the local device ID of the setting software (ScannerSetting_2D).
(3) Select the scanner from the connected device list and connect it to the device. The scanner beeps twice if
successfully connected.
(4) The next time connecting to the device, repeat the step (3).
5