Table of Contents
Advertisement
■ Charging procedure
(1) Connect the AC adapter to the charger and then plug it into an electrical outlet.
Confirm that the charger's green power supply LED lights.
(2) Place the scanner in the charger.
The scanner's indicator LED turns red, indicating the start of charging.
When charging is complete, approximately 2.5 hours later, the charge LED goes off and the indicator LED turns
green.
(3) Remove the scanner from the charger and unplug the AC adapter from the electrical outlet.
Operation and Status
Place the scanner in the charger.
Charging starts.
Approximately 2.5 hours later
Charging complete.
Scanner's indicator LED
Red
Red
Green
65
Advertisement
Table of Contents
