Table of Contents
Advertisement
(2) Adjusting the beeper volume
You can adjust the beeper volume to three levels--high, medium and low--using the QR-coded parameter menu or
configuration software (ScannerSetting_2D). The factory default is High.
Note: Enabling the Bluetooth interface with the "Start operation" QR Code symbol allows the beeper volume
adjustment.
Each time the "Beeper volume" QR Code symbol is read, the beeper volume cycles as shown below. The factory
default is High.
High
Medium
Low
Even if the scanner is turned off, this setting will be retained.
36
Advertisement
Table of Contents
