Configure An Active Speech Time Configuration - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems Advanced Speech Time Control User Manual

Configure an active speech time configuration

To configure an active speech time
configuration without loading a
new configuration, a speech time
configuration must first of all be
loaded. Please refer to the section
'Load a speech time configuration'
for more information on loading a
speech time configuration.
If there is no active speech time
configuration, the Open Set Tim.
button is disabled.
Select the Open Set Tim. button to
open the Set Speech Time window
instead of the Last 5 Speakers.
Please notice that any changes
made to an active speech time
configuration are not stored in the
database. If an agenda subject is re-
opened any previous changes made
to that configuration are not saved.
Permanent changes to the speech
time configurations must be made
in the CAA. If there are made any
changes made to the active speech
time configuration in the CAA,
these changes will not become
active before the configuration is
reloaded.
45