Cua; Load A Speech Time Configuration; No Active Conference - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems

CUA

The next steps of applying the speech time configurations to a meeting are done in the CUA. Overall, there
are two steps to consider. Depending on the actual system setup, one or both steps may be left out.
The first step is to load a speech time configuration either with or without an active conference.
The second step is to configure an active speech time configuration. The configuration options depend on the
active configuration :
•
Delegates (All)
•
Delegates (User Type)
•
Manual
•
Group
Please consult the following sections for the details on these two steps.

Load a speech time configuration

The speech time configurations can
be used both with and without an
active conference.

No active conference

Open the CUA/Microphones or
Conference menu and select the
Load Timers button.
Advanced Speech Time Control User Manual
39