Quick Guide - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems

Quick Guide

Please notice that the Advanced Speech Time Control User Manual presupposes comprehensive knowledge
of the basic operations of a standard SW 6000 system. All functionality not directly related to the Advanced
Speech Time Control functionality is only briefly explained. Please refer to the SW 6000 (CAA, CUA, CDA
and ECA) User Manuals for more information on the basic SW 6000 functionality.
How to get started with the Advanced Speech Time Control module in a few steps:
•
Step 1: Configure the required number of speech time configurations in the
CAA/Setup/Configurations/Speech Time Configuration menu.
(for meetings without a conference)
•
Step 2: Configure the Delegate List Configuration to display delegate/group speech time on the CUA
in the CAA/Setup/Configurations/Delegate List Configuration menu.
•
Step 3: Configure the CDA Configuration to display delegate/group speech time on the CDA in the
CAA/Setup/Configurations/CDA Configuration menu.
•
Step 4: Load the required speech time configuration in the CUA/Conference or Microphones menu.
•
Step 5: Reset the active speech time in the CUA/Conference or Microphones menu.
•
Step 6: Change the active speech time in the Open Set Time. window in the CUA/Microphones
menu.
•
Step 7: Load a new speech time configuration in the CUA/Conference or Microphones menu.
(for meetings with a conference)
•
Step 2: Assign a speech time configuration to a conference in the CAA/Conference menu.
•
Step 3: Assign a speech time configuration to the agenda subjects in the CAA/Conference menu.
•
Step 4: Configure the Delegate List Configuration to display delegate/group speech time on the CUA
in the CAA/Setup/Configurations/Delegate List Configuration menu.
•
Step 5: Configure the CDA Configuration to display delegate/group speech time on the CDA in the
CAA/Setup/Configurations/CDA Configuration menu.
•
Step 6: Start the conference and set the first subject on the agenda in the CUA.
•
Step 7: Reset the active speech time in the CUA/Conference or Microphones menu.
•
Step 8: Change the active speech time in the Open Set Time. window in the CUA/Microphones
menu.
•
Step 9: Load a new speech time configuration in the CUA/Conference or Microphones menu.
•
Step 10: Set a new subject on the agenda.
To understand the details of the Advanced Speech Time Control module, please follow the instructions in the
next sections. The manual is organised into sections in that order the functionality should be used.
Advanced Speech Time Control User Manual
5