Site Survey; Vap Profile Settings - Advantech IEEE 802.11a/n Wireless Access Point/ Client Bridge User Manual

Extension Channel Protection Mode
This is to avoid conflict with other wireless network and boost the ability of your device to catch all
legacy devices transmissions. However, it may decrease wireless network performance.
Compared to CTS-Self; the transmission amount of CTS-RTS is much lower.
Enable MAC Clone
Available in wireless client mode, it hides the MAC address of EKI-6331AN while displays the one
of associated wireless client or the MAC address designated manually.

Site Survey

Under wireless client mode, EKI-6331AN is able to perform site survey, through which, information on
the available access points will be detected.
Open "Basic Settings" in "Wireless", by clicking the "Site Survey" button beside "Wireless Mode"
option, the wireless site survey window will pop up with a list of available wireless networks around.
Select the AP you would like to connect and click "Selected" to establish connection.
Figure 23 Site Survey

VAP Profile Settings

Available in AP mode, EKI-6331AN allows up to 16 virtual SSIDs on a single BSSID and to configure
EKI-6331AN_User Manual
ƒ‰‡