Time Settings - Advantech IEEE 802.11a/n Wireless Access Point/ Client Bridge User Manual

before it is set to Router mode. To access the unit in Router mode via wired port,
please type the WAN IP address to enter the web page for WAN is on wired port and
LAN is on wireless port. Or, you can access device through the wireless device
connected with the EKI-6331AN.
In wireless client mode, users can access EKI-6331AN via its wired port, for WAN is
on wireless port and LAN is on wired port when device is set to Router mode.
Bridge mode and AP Repeater mode are similar to AP mode when device is set to
Router mode; WAN is on wired port and LAN is on wireless port. Thus users must also
connect EKI-6331AN with another wireless device before it is set to Router mode and
access EKI-6331AN via the connected wireless device.

Time Settings

Compliant with NTP, EKI-6331AN is capable of keeping its time in complete accord with the Internet
time. Make configuration in "Time Settings" from "System". To use this feature, check "Enable NTP
Client Update" in advance.
Figure 14 Time Settings
Current Time
Display the present time in Yr, Mon, Day, Hr, Min and Sec.
Time Zone Select
EKI-6331AN_User Manual
ƒ‰‡