Table of Contents
Advertisement
3.3.3.7
Access Control
The Access Control feature is only available when the wireless mode of the device is
set to AP, see "Management" on page 40.
Access Control allows for an administrator to allow or deny access by defining
specific devices through their MAC address.
To access this page, click Wireless - 2.4GHz > Access Control.
The following table describes the items in the previous figure.
Item
SSID
Access Control Method Click the drop-down menu to set the access control method:
Submit
3.3.3.8
Site Survey
The Site Survey feature is only available when the wireless mode of the device is set
to Client or Bridged Repeater mode, see "Management" on page 40.
To access this page, click Wireless - 2.4GHz > Site Survey.
Item
Refresh
AP list
SSID
BSSID
Frequency
Signal level
Encryption
Figure 3.20 Wireless - 2.4GHz > Access Control
Description
Click the drop-down menu to select the SSID from the list of
already created wireless networks.
Disable, Deny or Allow.
In the Deny or Allow menu, enter the MAC address of the target
device - support for up to 32 target devices.
Click Submit to save the values and update the screen.
Figure 3.21 Wireless - 2.4GHz > Site Survey
Description
Click to update the displayed AP list table.
Displays the name of the listed AP.
Displays the basic service set identifiers (BSSID) used to describe
the section of the SSID.
Displays the radio frequency of the listed SSID.
Displays the signal level of the listed SSID.
Displays the encryption type assigned to the listed SSID.
36
EKI-6333AC-2G Series User Manual
Advertisement
Table of Contents
