Advantech IEEE 802.11a/n Wireless Access Point/ Client Bridge User Manual page 26

fails.
STP Forward Delay: STP Forward Delay is the time spent in detecting and learning network tree
topology state before entering the forward state. Default time value is 1 sec.
GPS Coordinate Settings:
The GPS Coordinate Setting helps you mark the latitude and longitude of EKI-6331AN. Just enter
the coordinates and click the Apply button.
TCP/IP Settings
Open "TCP/IP Settings" in "System" as below to configure the parameters for LAN which
connects to the LAN port of EKI-6331AN. In this page, users may change the settings for IP
Address, Subnet Mask, and DHCP Server.
Figure 12 TCP/IP Settings (Bridge)
Obtain IP Address Automatically: If a DHCP server exists in your network, you can check this
option, thus EKI-6331AN is able to obtain IP settings automatically from that DHCP server.
Note:
When the IP address of EKI-6331AN is changed, the clients on the network often need
to wait for a while or even reboot before they can access the new IP address. For an
immediate access to the bridge, please flush the netbios cache on the client computer by
running the "nbtstat –r" command before using the device name of EKI-6331AN to access
its Web Management page.
In case the EKI-6331AN is unable to obtain an IP address from a valid DHCP server, it
EKI-6331AN_User Manual
ƒ‰‡