Site Survey; Access Control; Figure 3.9 Wireless Settings > Site Survey; Figure 3.10 Wireless Settings > Access Control - Advantech EKI-6333AC-A Series User Manual

3.4.5

Site Survey

To access this page, click Wireless Settings > Site Survey.
The following table describes the items in the previous figure.
Item
Refresh
3.4.6

Access Control

The Access Control feature is only available when the wireless mode of the device is
set to AP, see "Basic" on page 23.
Access Control allows for an administrator to allow or deny access by defining
specific devices through their MAC address.
To access this page, click Wireless Settings > Access Control.
The following table describes the items in the previous figure.
Item
Access Control Method Click the drop-down menu to set the access control method:
Apply
EKI-6333AC-A Series User Manual
Figure 3.9 Wireless Settings > Site Survey
Description
Click Refresh to update the screen.
Figure 3.10 Wireless Settings > Access Control
Description
Disable, Deny or Allow.
In the Deny or Allow menu, enter the MAC address of the target
device - support for up to 32 target devices.
Click Apply to save the values and update the screen.
27