Hardware Installation; Connect Up - Advantech IEEE 802.11a/n Wireless Access Point/ Client Bridge User Manual

Hardware Installation

Connect up

1. The bottom of EKI-6331AN is a movable cover. Loosen the screw with a screwdriver. Grab
the cover and pull it back harder to take it out as the figure shown below.
Figure 3 Move the Cover
2. Plug a standard Ethernet cable into the RJ45 port labeled "LAN 1". Do not plug the cable into
the RJ45 port labeled "LAN 2".
Figure 4 Cable Connection
EKI-6331AN_User Manual
ƒ‰‡