Table of Contents
Advertisement
Ping Interval: Specify the interval time to ping the remote unit.
Startup Delay: Specify the startup delay time to prevent reboot before EKI-6331AN is fully
initialized.
Failure Count To Reboot: If the ping timeout packets reached the value, EKI-6331AN will reboot
automatically.
Date Rate Test
The Data Rate Test allows you test the current RSSI at each data rate between EKI-6331AN.
Figure 44 Data Rate Test
Antenna Alignment
Under WDS mode, when the bridges are not easily visible from the location where the dish will be
installed, the antenna alignment tool can help you evaluate the position of the unit and adjust the angle
of the antenna more precisely. Keep it that in real circumstances a lot of additional factors should be
taken into account when your unit is installed. These factors include various obstacles (buildings,
trees), the landscape, the altitude, transponder orientation, polarization, etc.
To use the tool, select the desired remote WDS bridge and click "Start", the web page will display the
measured signal strength, RSSI and transmit/receive packets. If the signal quality is not quite good,
EKI-6331AN_User Manual
ƒ‰‡
Advertisement
Table of Contents
