Chapter 3 Basic Settings; Factory Default Settings - Advantech IEEE 802.11a/n Wireless Access Point/ Client Bridge User Manual

Chapter 3 Basic Settings

Factory Default Settings

The following table shows EKI-6331AN factory default settings. You can re-acquire these parameters
by default. If necessary, please refer to the
Table 1 Factory Default Settings
Features
Username
Password
Wireless Device Name
Operating Mode
Data Rate
LAN
Spanning Tree
802.11 Mode
Country/Region
Channel Number
SSID
Broadcast SSID
HT Protect
Data Rate
Output Power
Channel Mode
WMM
RTS Threshold (byte)
Fragmentation Length (byte)
Beacon Interval
DTIM Interval
Space in Meter
Flow Control by AP
Security
EKI-6331AN_User Manual
"Restore Factory Default
IP Address
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS Server
Settings".
Factory Default Settings
admin
password
apXXXXXX (X represents the last 6
digits of Ethernet MAC address)
AP
Auto
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable
802.11a/n
United States
149
Wireless
Enable
Disable
Auto
Full
20MHz
Enabled
2346
2346
100
1
0
Disable
Open System
ƒ‰‡