Site Survey; Vap Profile Settings - Advantech EKI-6311GN User Manual

Extension Channel Protection Mode
This is to avoid conflict with other wireless network and boost the ability of your device to catch
all 802.11g transmissions. However, it may decrease wireless network performance. Compared
to CTS-Self; the transmission amount of CTS-RTS is much lower.
Enable MAC Clone
Available only under wireless client mode, it hides the MAC address of the AP while displays the
one of associated wireless client or the MAC address designated manually.

3.8 Site Survey

Under wireless client mode, the EKI-6311GN is able to perform site survey, through which,
information on the available access points will be detected.
Open "Basic Settings" in "Wireless", by clicking the "Site Survey" button beside "Wireless
Mode" option, the wireless site survey window will pop up with a list of available AP in the
vicinity. Select the AP you would like to connect and click "Selected" to establish connection.
Figure 26 Site Survey

VAP Profile Settings

Available in AP mode, the IEEE 802.11b/g/n Wireless Outdoor CPE allows up to 16 virtual SSIDs on
a single BSSID and to configure different profile settings such as security and VLAN ID to each SSID. To
create a virtual AP, you may check the Enable box of the profile and click on the profile (eg. Profile 2)
to configure wireless and security settings. Hit Apply to active the profile.
EKI-6311GN-User_Manual V2.1
ƒ‰‡