Advantech IEEE 802.11a/n Wireless Access Point/ Client Bridge User Manual page 48

Figure 32 SNMP Configuration
Protocol Version
Select the SNMP version, and keep it identical on EKI-6331AN and the SNMP manager.
EKI-63331AN supports SNMP v2/v3.
Server Port
Change the server port for a service if needed; however you have to use the same port to use that
service for remote management.
Get Community
Specify the password for the incoming Get and GetNext requests from the management station.
By default, it is set to public and allows all requests.
Set Community
Specify the password for the incoming Set requests from the management station. By default, it is
set to private.
Trap Destination
Specify the IP address of the station to send the SNMP traps to.
Trap Community
Specify the password sent with each trap to the manager. By default, it is set to public and allows
all requests.
EKI-6331AN_User Manual
ƒ‰‡