3.5.4.1
Link Test
A Link Test is an additional tool based on Antenna Alignment Tool active status.
When you start the Antenna Alignment Tool, you may set a target throughput to
active the Link Test to estimate the packet error rate.
Choose a target throughput and test duration then click Start Test button. System will
generate a test data transmission to calculate the packet error rate.
An Rx rate shows the best data rate you can reach under the current RSSI level.
Link Test Tool can also help you to do the fine tuning of your antenna direction.
3.5.5
Utility > Site Survey
In wireless site survey, system provides a signal scan function to detect any available
wireless signal around the AP. It will help AP installer to clarify the environment.
Choose a radio interface which you are going to do the survey on device and click
Scan button. After a few seconds, system will show the APs around the device.
37
EKI-6340 Series User Manual