Table of Contents
Advertisement
Follow the steps described in Connect Up to finish the installation.
Pole Mounting
1.
Turn EKI-6331AN over. Put the pole mounting rings through the middle hole of it. Note that you
should unlock the pole mounting ring with a screw driver before putting it through EKI-6331AN
as the following right picture shows.
Figure 7 Pole Mounting – Step 1
2.
Mount EKI-6331AN steadily to the pole by locking the pole mounting ring tightly. The mounting
ring supports pole diameter 32mm to 70mm.
Figure 8 Pole Mounting – Step 2
3.
Now you have completed the hardware installation of the EKI-6331AN.
EKI-6331AN_User Manual
ƒ‰‡
Advertisement
Table of Contents
