Typical Application - Advantech IEEE 802.11a/n Wireless Access Point/ Client Bridge User Manual

Bridge ( WDS)
AP repeater
Antenna
Default embedded 2T2R 16dBi dual-polarity directional antenna
Reverse SMA Connector x 2 for external antennas
Modulation Techniques
802.11a OFDM
802.11n OFDM (BPSK, QPSK, 16-QAM, 64-QAM)
Support Frequency
FCC : 5725-5850
CE: 5470-5725 MHz (DFS band)
Wireless Tx power and Rx Sensitivity
Transmitted Power
802.11a: 24dBm @ 6Mbps, 21dBm @ 54Mbps
o
802.11an HT20: 23dBm @ MCS0/8, 20dBm@ MCS7/15
o
802.11an HT40: 20dBm @ MCS0/8, 19dBm@ MCS7/15
o
Receiver Sensitivity
802.11a Sensitivity -89dBm @ 6Mbps; -73dBm @ 54Mbps
802.11n HT20 -89dBm @ MCS0; -71dBm @ MCS7; -65dBm @ MCS15
802.11n HT40 -85dBm @ MCS0; -67dBm @ MCS7; -61dBm @ MCS15

Typical Application

This section describes the typical applications of the IEEE 802.11a/n Wireless Access Point/ Client
Bridge. By default, it is set to AP mode which allows it to establish a wireless coverage; besides, it is
also able to join any available wireless network under wireless client mode. It is also able to deliver
stable and efficient broadband connectivity for various applications.
EKI-6331AN_User Manual
*Switchable by software
ƒ‰‡