Table of Contents
Advertisement
The secondary Ethernet port (labeled LAN 2) is for EKI-6311GN or IP camera integration. To
use it you need to enable the secondary port in advance before connecting with the EKI-6311GN
or IP camera from EKI-6331AN Web Management as shown below.
3.
Take out the power cord and POE injector from the gift box, and plug the power cord into the DC
port of the POE injector as the below picture shows.
Figure 5 Connect to POE Injector
4.
Put what in the Step.2 and Step.3 together by plugging the other side of the Ethernet cable in
the Step.2 into the POE port of the POE injector in the Step.3. When you finish the Step.4, the
set will be like the following picture:
EKI-6331AN_User Manual
ƒ‰‡
Advertisement
Table of Contents
