Selecting A Monitor; Selecting A Camera - Honeywell HEGSA002 User Manual User Manual

3.4 RUN MODE, CONTINUED

3.4.2 Selecting a monitor

To change the current picture on a video display monitor, a monitor must first be
selected.
Press the Mon key followed by the desired monitor number.
Example: Select monitor 3 (in a system with 10 monitors).
NOTE: This example assumes the monitor icon button is programmed to execute key
code 61 (Monitor Select).

3.4.3 Selecting a Camera

NOTE: A monitor must be selected first.
Press the Camera key followed by the desired camera number, then Enter if required.
NOTE: This example assumes the camera icon button is programmed to execute the
default key code 73 (Camera Select).
To scroll through the available cameras, press the
Press the
select the next camera. The jog can be rotated counterclockwise to select the previous
camera.
518750-2960
Rev. F
3 Enter
OR
0 3
1 5 Enter
OR
0 1 5
key to select the previous camera. The jog can be rotated clockwise to
key to select the next camera.
18 HEMU001007
10/15/04