Selection Numbers - Honeywell HEGSA002 User Manual User Manual

3.4 RUN MODE, CONTINUED
Hard Key: VCR (recorder)
Hard Key: MUX

3.4.1 Selection Numbers

For all CCTV keyboard operations, an associated numeric entry is required to select and
control devices in the system. For example, when selecting a camera, the camera
number must be entered on the numeric keypad. If the maximum camera number used
in the system, for example, is Camera 20, the CCTV system would always expect a 2-
digit camera number to be entered when selecting any camera. To select camera 19,
the operator must enter 19 as a 1 followed by a 9. If the operator wishes to select
camera 1, the operator can enter the camera number two ways.
1
0
518750-2960
Rev. F
Enter
1 (If the required number of digits is pressed, the Enter key is not
required)
17 HEMU001007
10/15/04