Honeywell HEGSA002 User Manual User Manual page 2

ISSUE
1 September 2000
Rev A December 2000
2 December 2000
Rev A January 2001
Rev B May 2001
Rev C December 2001
Rev D February 2002
Rev E December 2003
Rev F October 2004
518750-2960
Rev. F
DATE
Initial Release
Added soft key and hard key default menus, hard key
functions, and SETMAX key code commands.
Deleted interface box between ULTRAKey and MXAT200.
Added model KEGSA008, changed references to MAX-1000
model numbers, revised Table 1 and Table 2, added
interface box for extending cable distance between
ULTRAKey and MAX-1000 or for connection to MAX-1000
RDAT200 with DB-15 connector.
Added a glossary and added the procedure for addressing
KD6 Z-Series domes
Added Ethernet port setup; added LCD B/L intensity
adjustment menu, corrected screen display for configuring a
soft key, added Icons for the button names, added selecting
a camera, selecting a monitor, programming a view, and
recalling a view; added alphanumeric entry capability for
MX14 or MXSYS04 subrack with an MX128E controller card,
added Appendix A.
Added Var Freq Buzzer Configuration soft key in Hardware
Configuration Menu
Deleted reference to models KEGSA004, KEGSA006, and
KEGSA008, revised references to RD530 to KEGS5300;
changed startup screen from Ultrak logo to Honeywell logo
(PCN 1486); added default keycode commands 143-145;
revised the Hard Key/func menu; revised config user menu;
updated the worldwide offices contact page, reformatted.
PCN 1837 Rebranding/Firmware Revision
REVISIONS
ii HEMU001007
10/15/04