Table of Contents
Advertisement
3.5
CONFIG MODE
To access the CONFIG mode from the RUN mode, press alt+Home to reboot the
controller. Touch the Honeywell logo to enter the Configuration mode.
Press the Configure soft key to access the
configuration menu.
To enter the configuration mode, the user
must first enter a valid password and press
Enter. The factory set password is 1111.
After a valid password is entered,
the Configuration menu is displayed.
Press a soft key to access the menus
for each configuration function or press QUIT
to exit the Configuration menu
518750-2960
Rev. F
21
HEMU001007
10/15/04
Advertisement
Table of Contents
