Default Policy On Ccr-I Failure - Cisco ASR 5x00 Administration Manual

Gx Interface Support
 If the subscriber falls back to local-policy because of CCR-I failure, CCR-I will be sent to the PCRF after the
timer expiry. On successful CCA-I call will be continued with PCRF or else the call will be continued with
local-policy and retry-count will be incremented.
 If the subscriber falls back to local-policy because of the CCR-U failure, IMS Authorization application waits for
some event change to happen or to receive an RAR from PCRF.
 In case of event change after the timer expiry, CCR-U will be sent to PCRF. On successful CCA-U message, call
will be continued with PCRF or else call will be with local-policy and retry-count will be incremented.
 If RAR is received after the timer-expiry the call will be continued with the PCRF. On expiry of maximum of
retries to connect to PCRF, call will be disconnected.

Default Policy on CCR-I Failure

The following parameters are supported for local configuration on P-GW. The configuration parameters are
configurable per APN and per RAT Type.
The following fields for a Default Bearer Charging Rule are configurable per APN and per RAT Type:
 Rule Name
 Rating Group
 Service ID
 Online Charging
 Offline Charging
 QCI
 ARP
 Priority Level
 QCI
 QVI
 Max-Requested-Bandwidth
 UL
 DL
Flow Description and Flow Status are not configurable but the default value will be set to Any to Any and Flow Status
will be set to Enabled.
The following command level fields are configurable per APN and per RAT Type:
 AMBR
 UL
 DL
 QCI
 ARP
 Priority Level
 QCI
Cisco ASR 5x00 Packet Data Network Gateway Administration Guide ▄
Assume Positive for Gx ▀
329