Active Charging Service Configuration - Cisco ASR 5x00 Administration Manual

▀ Configuring the System as a Standalone PMIP P-GW Supporting an eHRPD Network
exit
port ethernet <slot_number/port_number>
no shutdown
bind interface <pdn_sgi_ipv4_interface_name> <pdn_context_name>
exit
port ethernet <slot_number/port_number>
no shutdown
bind interface <pdn_sgi_ipv6_interface_name> <pdn_context_name>
end

Active Charging Service Configuration

Use the following example to enable and configure active charging:
configure
require active-charging optimized-mode
active-charging service <name>
ruledef <name>
<rule_definition>
<rule_definition>
exit
ruledef <name>
<rule_definition>
<rule_definition>
exit
charging-action <name>
<action>
▄ Cisco ASR 5x00 Packet Data Network Gateway Administration Guide
172
.
.
.
.
PDN Gateway Configuration